Augusta Concrete PatiosAugusta, GA CALL FOR A FREE QUOTE(762) 320-6343
Home › Services › Herringbone Brick Stamped Concrete

Herringbone Brick Stamped Concrete Augusta, GA

Augusta Concrete Patios Herringbone brick is a geometric pattern of interlocking rectangles at forty five degrees, and its whole quality depends on the layout being set out before the pour. Free on-site quote, usually within two working days.

Close view of stamped concrete texture
Herringbone Brick Stamped Concrete Augusta, GA

What herringbone brick stamped concrete means in Augusta

It reads as laid brick and it carries a strong sense of direction, which either leads the eye along a path deliberately or fights the shape of the area entirely.

Unlike an irregular stone pattern, herringbone is unforgiving. A cut at a slab edge is obviously a cut brick, and a misaligned mat shows immediately because the geometry is regular.

Brick is the material vocabulary of Augusta's older neighbourhoods, so a herringbone brick stamp reads as belonging here in a way a stone pattern sometimes does not.

Thickness
standard slab thickness for the use
Mix
integral colour plus contrasting release
Ready to use
seal at 28 days
Typical cost
$12–$20 per square foot
Service life
25 years, resealed

How herringbone brick stamped concrete is set out

Set-out happens before any concrete arrives. The starting line, the angle relative to the house, and where the pattern will meet the edges are all decided and marked.

A border in a soldier course, meaning bricks laid end to end around the perimeter, is close to essential. It gives the cut field pattern somewhere to stop.

Mats have to be aligned exactly to the previous placement, and any drift compounds across the slab. This is the pattern where the crew's discipline shows.

Colour is usually a warm brick tone with a darker release in the joints. A grey release on a brick pattern reads as concrete pretending, rather than as brick.

What herringbone brick stamped concrete costs in Augusta, GA

Upper mid-range. The mats are standard but the set-out and alignment take time, and a soldier course border adds a line to the quote that is worth paying for.

Upper mid-range, and the soldier-course border it needs is a line worth paying for rather than an upsell.

Where herringbone brick stamped concrete goes wrong in GA

Drift is the failure. A pattern that starts square to the house and is two degrees out by the far end cannot be fixed and is visible from a first floor window forever.

A pattern that starts square to the house and drifts two degrees by the far end is visible from an upstairs window for as long as the slab exists.

Where we do herringbone brick stamped concrete

We cover Augusta, Columbia County and the South Carolina side of the CSRA, including and 34 more areas.

Questions we get asked about herringbone brick stamped concrete

Does herringbone need a border?

Practically yes. A soldier course around the edge is what stops the diagonal pattern looking cut off.

Which direction should it run?

Set out relative to the house or the direction of travel, decided before the pour. It carries a strong sense of direction.

Is it more expensive than a stone pattern?

A little, because the set-out and the alignment take longer and the border is close to mandatory.

Get a free quote

Tell us what you need. We answer the same day, and the on-site visit is free.

Or call (762) 320-6343, fastest way to get a price.

Get a price for your herringbone brick stamped concrete

Call (762) 320-6343 and we will come out, measure, and leave you a written quote. There is no charge for the visit and no obligation afterwards.

📞 Call (762) 320-6343Get a quote